SkillAbove RV Tech Tools
Tech Tool Bundle
Tech Tool Bundle
Share
The full bundle will come with the following kits:
1. Peacemaker full kit in carrying case
2. Light Bulb Control box tester
3. Coddiwomple Plus Kit
4. EZ-SWITCH for Bluetooth access on Coddiwomple
5. TopHand awning installation Tool
Peacemaker plus kit contents below:
This tester is designed to make the technicians troubleshooting times faster by allowing you to test run all of the moving components in the rooftop unit.
This tester will not only test the cooling side of the unit, it can test heat pump and heat strip applications. The digital display will show amperage draw and voltage.
when tester is powered on there will be a brief boot up time. (This is set to allow unit to equalize)
once booted up you can turn on compressor in cooling mode (blue indicator light) and hi/lo fan to verify good operation.
when switching from cooling mode to heat mode (red indicator light) you will depress the heat mode button, once depressed everything will shut off and 16 seconds later the reversing valve will open. After the reversing valve opens the compressor will remain off for an additional 16 seconds then the compressor will start back up in heat mode.
(Older units that default reversing valve in heat mode will cool when heat mode is activated on tester)
We have incorporated a 90 minute shutdown feature so this tester can not be used as a override device for long periods of time as it is designed to test only. Once the 90 minutes have expired the indicator will flash red/blue at a rapid rate. If you boot up tester in heat mode you will receive a fast red flash simply unlatch the heat mode button to resume boot up in cooling mode.
The Peacemaker plus kit comes with three adapters and a detachable 10’ power cord.
1. Dometic®, Furion, GE and Advent style 6 pin
2. Coleman® style 9 pin with 2 pin heatstrip
3. 5 wire labeled pigtail for use on units without plug (some dometic® penguin ii units)
4. The Light Bulb Control Box Tester this device is designed to plug into dometic, Furion, GE, Advent and Coleman A/C control boards and will illuminate the corresponding indicators when the thermostat calls for actions including heat pump.
5. Hard carrying case for storing your peacemaker and light bulb control box tester.
CODDIWOMPLE Plus kit contents below:
will not work with DeWalt 20v powerstack batteries!
This kit will include the CODDIWOMPLE with base kit adapters such as:
1x 5’ Schwintek® at motor cable.
2x 6” Schwintek®/SlimRack® at controller cables.
1x 12’ awning/extension cable.
1x ground control® 3.0 cable.
1x 6 point level up® bi & Uni directional adapter.
Plus this kit will come with:
Alligator clip adapter.
ground control 3.0 at motor adapter.
both styles of kwikee® step cabels.
EQ smart® 6 point adapter (9pin).
Link to cable description and photos
CODDIWOMPLE cable instructions: PDF Download
The CODDIWOMPLE is a DeWalt® based tool so for example if you order a CODDIWOMPLE for a Milwaukee® M18 battery it will come with a battery adapter to convert your M18 battery to a DeWalt® tool. The adapter is approximately 1” tall.
Link to the app:
SkillAbove Inc app
TopHand Contents below:
will not work with DeWalt 20v powerstack batteries!
Use 4AH or larger battery for winch.
The TOPHAND is a tool designed to allow a single technician to replace awning or slide topper fabric.
this tool comes with many accessories in the carrying case such as:
X2 Pin tool to pin awnings equipped with springs.
x2 Microfiber towels for protecting outer awning arm.
x2 Heavy duty zip ties to hold awning arms in place.
x1 Spare fabric clamp.
x1 GRABO® Pro lifter with charger.
x1 Remote control charge cable.
The TOPHAND is a DeWalt based tool so for example if you order a TOPHAND for a Milwaukee® M18 battery it will come with a battery adapter to convert your M18 battery to a DeWalt® tool. The adapter is approximately 1” tall.
purchaser will need to supply their own winch battery such as Dewalt®, Milwaukee®, RIGID® or Makita®.
EZ-SWITCH Contents below:
YouTube video showing EZ-Switch in use:
The EZ-Switch plugs into the 8 pin round connector on the coddiwomple allowing you to connect and control devices such as awnings or Schwintek/SlimRack via Bluetooth connection from your phone or tablet. The remote app (EZ-Switch by SkillAbove) can be found on the apple App Store or google play store.
included adapter:
The included splitter adapter will allow you to plug directly into Schwintek or SlimRack motor harnesses at the controller.
Note: Please understand the EZ-Switch is designed for low amperage loads and has a auto reseting thermal breaker that will trip if load is too high for too long.
Amperage will not show on the coddiwomple screen when using the EZ-Switch as it is intended for remote use.
Link to the app below.
Apple: Link to app in App Store.
Android: Link to app in Google Play Store.